Yes! Visit us at our Showroom (31 Kaki Bukit Road 3, #0-05) and our Product Consultant will be there to address any of your queries!

For water purifiers only

We also offer non-obligatory home demonstrations where we bring our water purifier to your place for viewing and explanation.

This way, you can better visualise how the product sits in your home and also understand the installation procedure. Contact us to book a demonstration.

This is a direct pipe in and tankless water purifier where we would require direct connection to a water source.

This is a direct pipe in and tankless water purifier where we would require direct connection to a water source.

We will require an electrical point, water point and water outlet. An electrical point needs to be within 1.5 meters range, whereas a water point and water outlet to be within 6 meters.

Yes, there is a hot water locking function to prevent children from accessing the hot water feature. Simply press and hold the "Lock" for 3 seconds.

This feature is automatically activated once per hour by our STAR+ Water Purifier. Each activation will last 10 minutes.

It is advisable to perform manual cleaning once every 1 - 2 weeks.

Manual cleaning or also known as High-Speed Machine Flushing take 3 to 5 mins to remove mineral deposits.

Descaling is not required for our STAR+ Water Purifier.

Each filter flushing takes around 30 minutes to complete.

STAR+ Water Purifier has a built-in filter lifespan indicator that tracks and show users the remaining filter life.

Each set of water filters for STAR+ is due for change after 2000 litres of water has been dispensed. When 2000 litres of water has been dispensed, the filter change indicator will start to light up and blink to notify users that it is time to change the filters.

Filter life is displayed via the Filter Lifespan Indicator feature by deducting how much water has passed through the filters.

For example: On a new set of filters, with the Filter Change Indicator displaying 2000 litres. After 10 litres of water passes through the filters and is dispensed, the filter change indicator will reflect the filter life to be 1990 litres.

Filter life is displayed via the Filter Change Indicator feature by deducting how much water has passed through the filters.

For example: On a new set of filters, with the Filter Change Indicator displaying 2000L. After 10L of water passes through the filters and is dispensed, the filter change indicator will reflect the filter life to be 1990L.

Filters for STAR+ Water Purifier can be self-changed, without the need to make an appointment for machine servicing.

Here's a guide for more information.

STAR+ Water Purifier displays filter lifespan by accurately deducting how much water has passed through the filters.

For example: On a new set of filters, with the Filter Change Indicator displaying 2000 litres. After 10 litres of water passes through the filters and is dispensed, the filter change indicator will reflect the filter life to be 1990 litres.

Each household will have different water consumption rate due to the difference in size of household/lifestyle. Hence, it'd be more accurate if we were to track it via the volume of water that has passed through our water filters.

STAR+ Water Purifier works with 3 filters to provide a comprehensive 8-stage water filtration.

Stage 1 - Sediment Stage:

Removes dirt, rust and suspended solids

Stage 2 - Ion Exchange Resin Stage:

Removes heavy metal (E.G. Copper, Lead and Cadmium). Additionally, it also softens the water

Stage 3 - Pre-Carbon Stage:

Removes any organic chemicals and compounds (E.G. Chlorine and Benzene)

Stage 4 - Nano Membrane Stage:

Filters out any bacteria or harmful microorganisms to pore size of 0.001 Micron

Stage 5 - Positive Charge Membrane Stage:

Removes norovirus present in water

Stage 6 - Cellulose Stage:

Produce fiber in water that assist in our digestive system

Stage 7 - Post Carbon Stage:

Removing odour and taste in water

Stage 8 - Mineral Stage:

Adding minerals into the water that are needed by our body. The 4 major minerals that are added are Sodium, Magnesium, Calcium and Potassium

STAR+ Water Purifier can be self-maintained as there are no storage of water inside the machine.

Changing of filters can also be done by users in a fuss-free manner. Here's a guide for more information.

Minimal maintenance is required.

To ensure the hygiene and cleanliness of the system, clean the water purifier’s tray and nozzle guard once every 2-4 weeks.

To remove the nozzle guard, simply hold the nozzle guard with your fingers, and turn it in an anti-clockwise direction.

The LUNA Air Purifier covers an area of up to 87 SQM / 936 SQFT. Which is approximately the size of a 4 Room HDB Flat's living space.

Yes. Our 3 in 1 medical grade HEPA 13 filter effectively captures animal fur and pet danders in the air, it also remove any foul odour.

Each filter lasts for a period of approximately 1 year (based on 8 hours usage per day). Please note that this duration will vary & differ depending on the air quality of the surrounding environment and duration of product being in use.

Our warranty covers all the parts of the LUNA Air Purifier.

If the LUNA Air Purifier is used in the way it is intended and breaks down within the warranty period, you can book an appointment with our service center for in-person assistance.

Book an appointment with our service center here.

Our warranty does not cover the following:

- Normal wear and tear that may be caused to the machine from usage over time.

- Accidental damage caused to the machine.

- Damage to the machine due to improper usage.

The DAWN Air Purifier covers an area of up to 50 SQM / 538 SQFT. Which is approximately the size of a 3 Room HDB Flat's living space.

The Dawn Air Purifier has a built in PM 2.5 quality indicator that shows the air quality through its control panel.

Blue = Air Quality is Good

Green = Air Quality is Fair

Red = Air Quality is Bad

Yes. Our 3 in 1 medical grade HEPA 13 filter effectively captures animal fur and pet danders in the air, it also remove any foul odour.

Each filter lasts for a period of approximately 1 year (based on 7/8 hours usage per day). Please note that this duration will vary & differ depending on the air quality of the surrounding environment and duration of product being in use.

Our warranty covers all the parts of the DAWN Air Purifier.

If the DAWN Air Purifier is used in the way it is intended and breaks down within the warranty period, you can book an appointment with our service center for in-person assistance.

Book an appointment with our service center here.

Our warranty does not cover the following:

- Normal wear and tear that may be caused to the machine from usage over time.

- Accidental damage caused to the machine.

- Damage to the machine due to improper usage.

Yes, you can. JJOBI Sterilization Box sterilizes using UVC wavelengths of UV LED. Hence, it does not generate any heat, smell, or ozone. Toys made of all materials including plastic, wood, rubber, fabric, paper, and even battery-operated toys can be disinfected using the JJOBI Sterilization Box.

Do note that as UVC LED has a short wavelength, it is unable to penetrate through items that are made up of plastic. Hence, if we put a product that is wrapped up with plastic in the JJOBI Sterilization Box, only the plastic surface can be sterilized.

Firstly, wipe off any visible contaminants (e.g. food remains) on the toys. Next, put toys into the JJOBI Sterilization Box for thorough sterilization.

JJOBI Sterilization Box focuses on eliminating Vibrio Bacteria, E. coli, bacteria, and the Covid-19 Virus which are harmful to children.

JJOBI Sterilization Box is recognized by international authorized institutions, and it has been certified 99.9%
sterilization test by SGS and KCL.

Yes, all overlapping toys within the box can be sterilized even if the UV LED is situated at the lid.

The JJOBI Sterilization Box sterilizes its content using UVC Wavelength (275nm) and ultraviolet wavelengths can
act in the entire JJOBI Sterilization Box without reflection when it’s closed. This increases the sterilization power in an enclosed space. Hence, toys inside the box are 99.9% sterilized regardless of their position within the box.

However, do note that the sterilization effect may be reduced if the toys are excessively loaded or stacked too tightly together. If this happens, sterilize once and bring up the toys located at the bottom to sterilize once more to achieve a great effect.

There are no power buttons for the JJOBI Sterilization Box. When the lid is plugged in and closed, JJOBI Sterilization Box will automatically power on to start the sterilization process.

JJOBI Sterilization Box has been designed thoughtfully to not include any protruding buttons for the child’s safety.

Additionally, when the lid of the JJOBI Sterilization Box is open, the content within the box may be exposed to viruses and bacteria in the air. With the JJOBI Sterilization Box powering on automatically when the lid is closed, it ensures that the toys are always sterilized to maintain a hygienic condition.

The dimension of the lid is as follows:

39.5 (Width) x 39.5 (Depth) x 5.5 (Height) CM